AMX NXB-CCG-K Technické informace stáhnout pdf (Strana 17)

Lutron® integration protocol

ERROR Command Formats

Refer to “ERROR Command-speciﬁc ﬁelds” table

Operation

Command

~ERROR, Error Number

ERROR Command-speciﬁc ﬁelds

Error Numbers:

Description Error Number

Parameter count mismatch 1

Object does not exist 2

Invalid action number 3

Parameter data out of range 4

Parameter data malformed 5

Unsupported Command 6

Example ERROR Messages

Operation Command String

Parameter count mismatch: Too many or too few parameters for the speciﬁed action

Too many parameters when activating scene #AREA,2,6,1,1,1,1,1<CR><LF>

Parameter count mismatch. ~ERROR,1<CR><LF>

Object does not exist: The Integration ID or serial number entered does not map to a known part of the system

Send command to an ID that is not valid #OUTPUT,1234,1,100.00<CR><LF>

Object does not exist ~ERROR,2<CR><LF>

Invalid Action: The action does not exist for this command

Send invalid action (4321) to Area 2 #AREA,2,4321<CR><LF>

Invalid action number ~ERROR,3<CR><LF>

Parameter data out of range: The parameter data is out of range for this action

Send Output 11 to 120% #OUTPUT,11,1,120.00<CR><LF>

Parameter data out of range ~ERROR,4<CR><LF>

Parameter data malformed: The parameter data given was not formatted properly

Set Time to 12:23:24:25 #SYSTEM,1,12:23:24:25<CR><LF>

Invalid action number ~ERROR,5<CR><LF>

Integrator’s Reference (continued)

ERROR: Command Summary

Integration Access Points will respond with an error if an invalid command is received. See the

table below for explanations of different errors.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 143 144

Žádné komentáře

AMX NXB-CCG-K Technické informace Strana 17