AMX MAX-HT12T Manuál s instrukcemi stáhnout pdf (Strana 52)

MXD-430 4.3” X Series Wall/Flush Mount Touch Panel

MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels

3. After ensuring proper placement, cut out the mounting surface for the Backbox using the MXD-430 Installation

Template as a guide.

4. Thread the incoming Ethernet from their terminal locations through the surface opening (FIG. 44).

Leave enough slack in the wiring to accommodate any re-positioning of the panel.

5. Remove the knockout on the bottom of the Backbox (FIG. 43) and thread the incoming wiring through the

knockout hole.

6. Thread the incoming Ethernet and USB wiring (if USB access is desired) from the surface opening and through the

knockout.

7. Push the Backbox into the mounting surface. Insure that the locking tabs lie flush against the Backbox and that the

Backbox goes freely into the opening.

8. Extend the locking tabs on the sides of the Backbox by tightening the screws inside the box (FIG. 45) until snug.

Using the included template to select the final placement of the Backbox is highly

recommended. The outside edges of the template are the same dimensions as the

touch panel, which allows you to troubleshoot possible conflicts with wall edges,

doors, and other potential obstacles.

Making sure the actual cutout opening is slightly smaller than the provided

dimensions is highly recommended. This action provides a margin for error if the

opening needs to be expanded. Too little wall material removed is always better than

too much.

FIG. 44 MXD-430 Backbox Installation (Landscape)

Knockout

Backbox

Mounting Surface

Locking Tab

Optional #4 Screws

The maximum recommended torque to screw in the locking tabs on the plastic

Backbox is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the tab

screws, such as with powered screwdrivers, can strip out the locking tabs or damage

the Backbox.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 61 62

Žádné komentáře

AMX MAX-HT12T Manuál s instrukcemi Strana 52