AMX Rack Rail Kit MMS Servers Uživatelský manuál stáhnout pdf (Strana 108)

B-8

SUPERSERVER 7044A-82R Manual

2. Under the item "Arrays Label", type in an label and press Enter.

(*Note: The label shall not be more than 15 characters.)

3. For RAID 0, select the desired stripe size. (*Note: Available stripe sizes

are 16, 32, and 64 KB-default. It is recommended that you do not change

the default setting.)

4. The item: "Create RAID via" allows you to select between the

different creating methods for RAID 0 and RAID 1.

The following table gives examples of when each is appropriate.

(*Note: If you select Migrate for RAID 0, or Build for RAID 1, you will be

asked to select the source drive. The contents of the source drive will be

preserved. However, the data on the new drive will be lost.)

Raid Level Create Via When Appropriate

RAID 0 No Init Creating a RAID 0 on new drives

RAID 0 Migrate

(*Note)

Creating a RAID 0 from one new drive and

one drive with data you wish to preserve

RAID 1 Build1 Any time you wish to create a RAID 1, but especially if

you have data on one drive that you wish to preserve

RAID 1 Clear Creating a RAID 1 on new drives, or when you want to

ensure that the array contains no data after creation.

RAID 1 Quick

RAID 1 Init

Fastest way to create a RAID 1.

Appropriate when using new drives

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 125 126

Žádné komentáře

AMX Rack Rail Kit MMS Servers Uživatelský manuál Strana 108