AMX NI-3100 Specifikace stáhnout pdf (Strana 51)

WebConsole - System Options

NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)

Manage System - Control/Emulate Options

Click the Control/Emulate link (in the Manage System tab) to access the Control/Emulate Options page

(FIG. 36). The options on this page allow you to Control or Emulate a device connected to this Master.

Device Control/Emulation is accomplished by manipulating a target device’s channels, levels, and sending

both send commands and strings to the device.

To Control a device means that the program generates messages which appear to a specified device

to have come from the Master.

To Emulate a device means that the program generates messages which appear to the Master to

have come from a specified device (physical or virtual). When Emulate is selected, a Push button is

added to the Channel Code section (see FIG. 36).

Controlling or Emulating a System Device

1. Select the device that you want to Control or Emulate, via the Device Tree:

a. Click the Show Device Tree option to show the Device Tree window (if it is not already enabled).

b. In the Device Tree, click on the Information (i) icon for the device that you want to control or

emulate. This opens a Network Settings page showing network configuration details for the selected

device. See the Device Network Settings Pages section on page 23 for details.

c. Click on the Control/Emulate link. This opens a Control/Emulate Options page for the selected

device (FIG. 37).

FIG. 36 Manage System (Control/Emulate)

Push button only displayed if

Emulate is selected

The System Number, Device Number, and Port Number fields are read-only. Instead

of specifying these values for a System Device, select a device via the Device Tree to

populate these fields with that device’s information.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 159 160

Žádné komentáře

AMX NI-3100 Specifikace Strana 51