AMX MAX-MMS-400 Instalační příručka stáhnout pdf (Strana 2)

AMX Corporation reserves the right to alter specifications without notice at any time.

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-2179

REV: F

Select Changer > Load All from the BulkRipper menu bar. This prompts the

MDL200 to present empty slots for you to insert discs. If there are discs already

occupying some slots, the unit will automatically skip them and present the next

available empty slot. You will hear the MDL200’s internal carousel spin to the next

available empty slot and stop. At this point you have approximately 15 seconds to

insert a disc.

• A decal below the slot indicates the proper orientation of the disc: the label side

of the disc must always face to the right.

• As each disc is loaded, it is assigned to the first available slot for the drive it is

added to, as is indicated in BulkRipper.

• The MDL200 features two DVD-ROM drives which can be used simultaneously.

Typically, you would assign half of the discs to Drive 1, and the rest to Drive 2.

• You can load/unload discs while the MDL200 is recording. This requires that

you unlock the front panel of the MDL200 (which by default locks during the

recording process) via the File > Unlock option.

• Keep the disc cases in the order that you removed and loaded the discs to

make the unloading process easy.

Note that at this point the discs that have been loaded are indicated on the

BulkRipper main screen, but without any title or media information since they have

not yet been identified by the program.

Step 4: Identify and Record the Discs

Once all of the disks have been loaded into the MDL200, you are ready to rip the

discs to the MMS server. There are usually two operations involved: Identification

and Recording of the discs.

Identifying the Discs

1. To identify the discs loaded in the MDL200, specify a range of discs to be iden-

tified, using the First Disc and Last Disc fields (on the BulkRipper main screen)

for each drive.

2. Click the Identify button. BulkRipper uses color coding to indicate whether

each disc has been successfully identified (refer to the MDL200 Multi-Disc

Loader and BulkRipper Software Instruction Manual. for details):

3. Occasionally some of the discs may not be successfully identified, in which

case the application will prompt you to verify that you want to proceed with the

recording process. At this point, you can proceed in either of two ways:

a. Click Yes at the prompt to proceed with the recording, with the

understanding that any discs that were not identified will not have any

descriptive information associated with them, or...

b. Click No to cancel the recording process so that you can go back and try

again to identify the problem disc(s), or enter the disc information

manually (as described in the

If one or more discs cannot be

identified: section

below).

Recording the Discs

Once the discs in the MDL200 have been identified (or once you have prompted

BulkRipper to proceed without having identified all of the discs as described above),

you can begin the process of reading media and loading the MMS:

1. Press the Record button to begin recording (on the drive(s) that you want to

use), and let the MDL200 run until the process is complete.

2. The status of each disc is indicated in the Status column as it is being

recorded. Once complete, the Status message should indicate that the media

was successfully loaded on the MMS. Note that the MDL200 loads one disc at

a time per drive, with both drives working simultaneously.

• The amount of time it takes to load each disc will vary, relative to the amount

and type of data on the disc. Most DVDs take between 30 minutes and one

hour to load. Audio CDs are typically much faster.

• While the MDL200 is recording, you can still identify discs (on either drive)

without interrupting the recording process.

• You can stop and restart the process at any time (Start and Stop buttons) with-

out closing the session.

• While recording, the front panel of the MDL200 locks. You can unlock it via the

File > Unlock option without interrupting the recording process. This allows

you load/unload discs while the MDL200 is recording.

• BulkRipper will indicate when the entire process is complete with the "Ready"

message in the Status Bar.

3. As each disc is read it is automatically loaded on the MMS Server.

4. When all discs in the specified range have been loaded, BulkRipper displays

the message: "Ripping Is Complete"

5. Once the process is complete, you should verify the contents of the MMS

server via the WinMAX application (Movies and Music tabs).

You can use WInMAX to re-identify any discs that display with incorrect or incomplete

disc information If necessary. You can also use WinMAX to manually enter/edit disc

information as needed. Refer to the WinMAX Instruction Manual (available online at

www.amx.com) for details.

If one or more discs cannot be identified:

While BulkRipper will allow you to proceed with recording discs that could not be

identified, it is recommended that you attempt to identify all discs before recording,

so that each title will have information available to present to the end-user when they

select the DVD or CD. In most cases this will require manually selecting a match from

the database.

1. Double-click on a title in BulkRipper to open the Multiple Matches dialog.

2. Specify a search method: Title (default setting) or UPC.

3. Enter the disc title (or UPC code) in the Search field. The results are displayed

in the lower window of this dialog.

4. Select the best match from the list and click OK to assign the selected title (and

associated disc information) to the disc.

If no suitable matches are listed, or if none are found, then you can enter the

information manually:

1. Click New Entry in the Multiple Matches dialog to open the New Entry dialog.

2. Enter the disc title and information and click OK to accept the new information.

Removing Discs From The MDL200

When you’re finished recording all of the discs in the MDL200, remove them from the

unit. To unload one or discs, select the titles (hold down the Ctrl key to select multiple

titles) and select Changer > Eject. Alternatively you can use the Changer > Eject

All command to eject all of the discs. In either case, as each disc is ejected, it must

be manually removed from the disc tray on the front of the MDL200. You have 15

seconds to remove the disc before it is pulled back into the unit and the eject

command is cancelled.

Refer to the BulkRipper Instruction Manual (available online at www.amx.com) for

detailed description of the Bulkripper user interface and additional information on

using Bulkripper to identify, record and load discs to the MMS server.

Clearing Disc Information From the Disc/Slot Window

By default, all disc information is displayed in the Disc/Slot Window until it is manually

cleared. Select File > Reset All to reset (clear) all of the disc information in the Disc/

Slot Window. Note that the The Reset All command also stops the recording

process if it is in progress.

Note: This document is only intended to provide a short cut to installing and using

the MDL200 and BulkRipper. For more detailed product information and instructions,

refer to the MDL200 Multi-Disc Loader and BulkRipper Software Instruction Manual.

Notice: MAX Products are not designed or intended to, and may not be used to,

violate anyone’s copyright or other intellectual property rights. Each user of the MAX

Products may only use the Products in connection with materials legally owned or

licensed by such user and only to the extent such ownership or license rights permit

such use.

FIG. 3 BulkRipper main screen

Record

- press to record the discs within the range

Cancel

- press to cancel the loading process on this dr

Unmount

- press to unmount the disc currently loaded

The

First Disc/Last Disc

fields specify t

Indicates that the laptop is connected and communicating with the MMS server

Status Bar

Cur Disc

indicates which disc is

being loaded (on each drive).

Indicates that the MDL200 is

connected to the laptop and running

specified for this drive

Status Bar

- indicates drive

status and percentage comp

Drive 1 controlsDrive 2 controls

Disc/Slot window

range of discs to include in the loading

(on each drive)

(without closing this session)

Identify

- press to identify the discs within the range

specified for this drive

in this drive

process (for each drive)

Bar

1 2

MAX MDL200 Multi-Disc Loader 1

Komentáře k této Příručce

Žádné komentáře

AMX MAX-MMS-400 Instalační příručka Strana 2

Komentáře k této Příručce

Související produkty a manuály pro ne AMX MAX-MMS-400