AMX DXLink Multi-Format Wallplate Uživatelský manuál Strana 4

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 7
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 3
4
POWER SUPPLY
External, Required
Power must be supplied by a DXLink Power sourcing
device such as:
Enova DGX 8/16/32/64 Digital Media Switcher (with a
DXLink Twisted Pair Input Board installed)
•Compatible Enova DVX All-In-One Presentation
Switcher (DVX-3155HD, DVX-3156HD or DVX-2155HD)
PS-POE-AT-TC High Power PoE Injector
PDXL-2 Power over DXLink Controller
AMX only supports the use of these approved Power
over DXLink solutions. Other third party
power supplies or non-compatible standard PoE
solutions may damage the DXLink equipment. To use
PS-POE-AT-TC or PDXL-2 as a power source the
wallplates require firmware v1.2.40 or above
ENVIRONMENTAL
Temperature (Operating)
32° to 104° F (0° to 40° C)
Temperature (Storage)
-22° to 158° F (-30° to 70° C)
Humidity (Operating)
5% to 85% RH (non-condensing)
Humidity (Storage)
0% to 90% RH (non-condensing)
Heat Dissipation (Max)
Power over DXLink supplied: 24 BTU/hr
FRONT CONNECTORS
User Accessible (accessible with faceplate mounted)
HDMI Input
HDMI Type A Female
Analog Video Input
HD-15 (Breakout cable required for non RGB formats)
Analog Stereo Input
3.5mm Mini-Stereo Jack
USB (HID) Keyboard & Mouse
USB Mini-B Connector
FRONT CONNECTORS
Setup Front Connectors (not accessible with
faceplate mounted)
Advanced Configuration Interface
USB Mini-B Connector
ID Pushbutton
Toggle between DHCP and static IP addressing
Places system in NetLinx Device ID assignment mode
Reset the factory default settings
Restore the factory firmware image
Reset Pushbutton
Resets/reboots the CPU of the wallplate
BACK CONNECTORS
DXLink Output
RJ-45
CONTROL
Advanced Configuration Interface
USB Mini-B Connector
INDICATORS
Power Indicator
Green indicates whether or not the module is powered
on
Zobrazit stránku 3
1 2 3 4 5 6 7

Komentáře k této Příručce

Žádné komentáře