AMX CSG-580 Specifikace stáhnout pdf (Strana 96)

Protected Setup Pages

MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom

System Settings - USB

The USB tab (FIG. 88) controls the ability for the MVP-9000i to connect to a network via a USB connection.

The features on the USB tab include:

Calibrate Page

The Calibrate page (FIG. 89) allows you to calibrate the touch panel for accurate button selection.

1. From the Protected Setup page, touch the Calibration button to open the Calibrate page.

2. Press the crosshairs in turn. If the crosshairs are not touched within ten seconds, the MVP-9000i will return to the

Protected Setup page.

FIG. 88 System Settings page - USB tab

System Settings - USB Tab

Back: Saves all changes and returns to the previous page.

WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current

connection to the Master is Wireless (image of a radio antenna) or Wired (image

of three networked computers).

Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a

constant visual indication of current connection status.

Note: a Lock appears on the icon if the panel is connected to a secured NetLinx

Master.

DHCP/Static: This field will always display Static.

IP Address: Displays the secondary IP address for the panel. The last series of digits may

be edited, with a host number added between 2 and 254.

Subnet Mask Displays the subnet mask address for the panel.

FIG. 89

Calibrate page

The Calibrate page may also be accessed by holding the lower left capacitive touch

button and the directional pad for 6 seconds, or by pressing the Reset button on the

left side of the device for 9 seconds.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 201 202

Žádné komentáře

AMX CSG-580 Specifikace Strana 96