AMX Rack Rail Kit MMS Servers Instalační příručka

 2014 Moxa Inc. All rights reserved. P/N: 1802075280021 PT-7528 Series (24-Port Copper Models) Hardware Installation Guide Moxa PowerTra

- 10 - Alarm Contact One relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC Optical Fiber (100BaseFX) Distance Multi-mode

- 11 - 3. Mechanical Loading: Mounting of the equipment on the rack should be such that a hazardous condition is not achieved due to uneven mechanic

- 2 - Package Checklist The Moxa PowerTrans switch is shipped with the following items. If any of these items are missing or damaged, please contact

- 3 - Dimensions; unit = mm (in) Fiber Ethernet Interface Modules

- 4 - Rack Mounting Use six screws to attach the PT switch to a standard rack. Rack Mounting Kit PT-7528 Side View NOTE Two additional rack-mount

- 5 - Wiring the Relay Contact Each PT-7528 switch provides two types of relay output, at the user’s option. Refer below for detailed instructions on

- 6 - Gigabit Ethernet 1000BaseTX Cabling The IEEE 802.3ab Gigabit Ethernet standard defines 1000 Mbps Ethernet communications over distances of up t

- 7 - ABC-02-USB Installation Plug the ABC-02-USB into the USB storage port of the Moxa PT-7528 series. We suggest attaching the ABC-02-USB to a wall

- 8 - FAULT RED On One of the following situations exists: • The signal contact is open. • ABC Loading/Saving Failure. • The port has been disable

- 9 - FAULT + MSTR/HEAD + CPLR/TAIL Rotate Blinking Sequentially ABC-02-USB is importing/exporting files. STATE + FAULT + MSTR/HEAD + CPLR/