Amx MVP-5100 Uživatelský manuál

Operation/Reference GuideMio Modero Touch PanelsMVP-5100/5150Modero® ViewpointWidescreen Touch PanelsLast Updated: 12/2/2008

Introduction2MVP-5100/5150 Modero Viewpoint Touch PanelsMVP-5150 5.2" Modero ViewPoint WiFi Touch PanelMVP-5150 Specifications (FG5966-07)Dimens

Upgrading Firmware92MVP-5100/5150 Modero Viewpoint Touch Panels6. When finished, click OK to close the Advanced Settings window and save all changes.

Upgrading Firmware93MVP-5100/5150 Modero Viewpoint Touch PanelsUploading IR Codes to the MVP-5100Since the MVP-5100 communicates with other devices t

Upgrading Firmware94MVP-5100/5150 Modero Viewpoint Touch Panels4. When the IR file appears in the Workspace Tree, right-click on the file and select

Upgrading Firmware95MVP-5100/5150 Modero Viewpoint Touch Panels7. From the main menu, select Tools > Firmware Transfers > Send To NetLinx Devic

Upgrading Firmware96MVP-5100/5150 Modero Viewpoint Touch PanelsAdding an AMX IR Database file to NetLinx StudioTo add an IR file contained in AMX’s I

Upgrading Firmware97MVP-5100/5150 Modero Viewpoint Touch Panels4. In the File Properties window (FIG. 85), verify the Identifier and Description info

Upgrading Firmware98MVP-5100/5150 Modero Viewpoint Touch PanelsAdding a personal IR Database file to NetLinx StudioTo choose an IR file from a person

Programming99MVP-5100/5150 Modero Viewpoint Touch PanelsProgrammingOverviewYou can program the MVP-5100 and MVP-5150, using the commands in this sect

Programming100MVP-5100/5150 Modero Viewpoint Touch PanelsPage Commands (Cont.)@PDRSet the popup location reset flag.If the flag is set, the popup wil

Programming101MVP-5100/5150 Modero Viewpoint Touch PanelsPage Commands (Cont.)@PPFDeactivate a specific popup page on either a specified page or th

Introduction3MVP-5100/5150 Modero Viewpoint Touch PanelsMVP-5150 Specifications (FG5966-07) (Cont.)External ComponentsConnector: 5-pin Mini-USB conne

Programming102MVP-5100/5150 Modero Viewpoint Touch PanelsPage Commands (Cont.)@PPMSet the modality of a specific popup page to Modal or NonModal.A M

Programming103MVP-5100/5150 Modero Viewpoint Touch PanelsPage Commands (Cont.)@PSESet the show effect for the specified popup page to the named show

Programming104MVP-5100/5150 Modero Viewpoint Touch PanelsPage Commands (Cont.)PPOFDeactivate a specific popup page on either a specified page or the

Programming105MVP-5100/5150 Modero Viewpoint Touch PanelsProgramming NumbersThe following information provides the programming numbers for colors, fo

Programming106MVP-5100/5150 Modero Viewpoint Touch PanelsRGB Values for all 88 Basic Colors (Cont.)Index No. Name Red Green Blue36 Very Light Cyan 0

Programming107MVP-5100/5150 Modero Viewpoint Touch PanelsFont styles and ID numbersFont styles can be used to program the text fonts on buttons, slid

Programming108MVP-5100/5150 Modero Viewpoint Touch PanelsBorder styles and Programming numbersBorder styles can be used to program borders on buttons

Programming109MVP-5100/5150 Modero Viewpoint Touch PanelsTPD4 Border Styles by Name (Cont.)No. Border styles No. Border styles53 Diamond 185 97 Menu

Programming110MVP-5100/5150 Modero Viewpoint Touch Panels TPD4 Border Styles by Name (Cont.)No. Border styles No. Border styles141 Menu Left Rounded

Programming111MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button CommandsThese Button Commands are used in NetLinx Studio and are case i

Introduction4MVP-5100/5150 Modero Viewpoint Touch PanelsMVP-5100 5.2" Modero ViewPoint IR Touch PanelThe MVP-5100 differs from the MVP-5150 in t

Programming112MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BAUAppend unicode text.Same format as ^UNI.Syntax: &q

Programming113MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BCTSet the text color to the specified color.Only if t

Programming114MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BIMSet the input mask for the specified address.Synta

Programming115MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BMCButton copy command. Copy attributes of the sourc

Programming116MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BMFSet any/all button parameters by sending embedded

Programming117MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BMF (Cont.)For some of these commands and values, ref

Programming118MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BMISet the button mask image.Mask image is used to cro

Programming119MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BNNSet the TakeNote network name for the specified Ad

Programming120MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BORSet a border to a specific border style associated

Programming121MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BRDSet the border of a button state/states.Only if the

Introduction5MVP-5100/5150 Modero Viewpoint Touch PanelsMemoryThe MVP-5100 and MVP-5150 come with 128MB of Mobile DDRAM memory and 256 MB NAND Flash

Programming122MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^BVLLog-On/Log-Off the computer control connection.Sy

Programming123MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^CPFClear all page flips from a button.Syntax: "&a

Programming124MVP-5100/5150 Modero Viewpoint Touch Panels "^" Button Commands (Cont.)^FONSet a font to a specific Font ID value for those

Programming125MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^GLHChange the bargraph upper limit.Syntax: "&apo

Programming126MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^GSNChange the bargraph slider name or joystick cursor

Programming127MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^JSBSet bitmap/ picture alignment using a numeric keyp

Programming128MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^JSTSet text alignment using a numeric keypad layout f

Programming129MVP-5100/5150 Modero Viewpoint Touch Panels"^" Button Commands (Cont.)^TECSet the text effect color for the specified addres

Programming130MVP-5100/5150 Modero Viewpoint Touch PanelsMiscellaneous MVP Strings back to the MasterThe following two strings are sent by the MVP pa

Programming131MVP-5100/5150 Modero Viewpoint Touch PanelsText Effects NamesThe following is a listing of text effects names associated with the ^TEF

Introduction6MVP-5100/5150 Modero Viewpoint Touch PanelsBasic OperationThe MVP-5100 and MVP-5150 are operated using their integral touchscreens. If t

Programming132MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query CommandsButton Query commands reply back with a custom event. There will be one

Programming133MVP-5100/5150 Modero Viewpoint Touch PanelsAll custom events have the following 7 fields: These fields are populated differently f

Programming134MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?BCFGet the current fill color.Syntax:"'?BCF-<vt a

Programming135MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?BMPGet the current bitmap name.Syntax:"'?BMP-<vt

Programming136MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?BRDGet the current border name.Syntax:"'?BRD-<vt

Programming137MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?FONGet the current font index.Syntax:"'?FON-<vt a

Programming138MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?JSBGet the current bitmap justification.Syntax:"'?J

Programming139MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?JSTGet the current text justification.Syntax:"'?JST-

Programming140MVP-5100/5150 Modero Viewpoint Touch PanelsButton Query Commands (Cont.)?TEFGet the current text effect name.Syntax:"'?TEF-&l

Programming141MVP-5100/5150 Modero Viewpoint Touch PanelsPanel Runtime OperationsSerial Commands are used in the AxcessX Terminal Emulator mode. Thes

Accessories7MVP-5100/5150 Modero Viewpoint Touch PanelsAccessoriesTable Charging StationThe MVP-5100 and MVP-5150 may be used with the MVP-TCS-52 Tab

Programming142MVP-5100/5150 Modero Viewpoint Touch PanelsPanel Runtime Operation Commands (Cont.)@AKPPop up the keypad icon and initialize the text

Programming143MVP-5100/5150 Modero Viewpoint Touch PanelsPanel Runtime Operation Commands (Cont.)@EKPExtend the Keypad.Pops up the keypad icon and in

Programming144MVP-5100/5150 Modero Viewpoint Touch PanelsPanel Runtime Operation Commands (Cont.)@SOUPlay a sound file.Syntax:"'@SOU-<so

Programming145MVP-5100/5150 Modero Viewpoint Touch PanelsInput CommandsThese Send Commands are case insensitive. Input Commands^CALPut panel in cal

Programming146MVP-5100/5150 Modero Viewpoint Touch PanelsEmbedded codesThe following is a list of G4 compatible embedded codes: Embedded CodesDecimal

Programming147MVP-5100/5150 Modero Viewpoint Touch PanelsPanel Setup CommandsThese commands are case insensitive. Panel Setup Commands^MUTSet the pa

Programming148MVP-5100/5150 Modero Viewpoint Touch Panels

Battery Life and Replacement149MVP-5100/5150 Modero Viewpoint Touch PanelsBattery Life and Replacement OverviewThe battery powering the MVP-5100 and

Battery Life and Replacement150MVP-5100/5150 Modero Viewpoint Touch PanelsBattery ReplacementThe touch panel's battery is intended to last the l

Appendix A: Text Formatting151MVP-5100/5150 Modero Viewpoint Touch PanelsAppendix A: Text FormattingText Formatting Codes for Bargraphs/JoysticksText

Accessories8MVP-5100/5150 Modero Viewpoint Touch PanelsPowering the MVP-TCS-52The MVP-TCS-52 uses a PS3.0 power supply (included with the touch panel

Appendix A: Text Formatting152MVP-5100/5150 Modero Viewpoint Touch PanelsText Area Input MaskingText Area Input Masking may be used to limit the allo

Appendix A: Text Formatting153MVP-5100/5150 Modero Viewpoint Touch PanelsRefer to the following Send_Commands for more detailed information: Input ma

Appendix A: Text Formatting154MVP-5100/5150 Modero Viewpoint Touch PanelsA keyboard entry using normal text entry is straightforward. However, once a

Appendix A: Text Formatting155MVP-5100/5150 Modero Viewpoint Touch PanelsURL ResourcesA URL can be broken into several parts. For example, with the U

Appendix B: Wireless Technology156MVP-5100/5150 Modero Viewpoint Touch PanelsAppendix B: Wireless TechnologyOverview of Wireless Technology 802.11b/

Appendix B: Wireless Technology157MVP-5100/5150 Modero Viewpoint Touch PanelsTerminology 802.1x IEEE 802.1x is an IEEE standard that is built on th

Appendix B: Wireless Technology158MVP-5100/5150 Modero Viewpoint Touch Panels WEP Short for Wired Equivalent Privacy, WEP is a scheme used to secur

Appendix B: Wireless Technology159MVP-5100/5150 Modero Viewpoint Touch Panels WPA2 Also know as IEEE 802.11i, this is an amendment to the 802.11 st

Appendix B: Wireless Technology160MVP-5100/5150 Modero Viewpoint Touch PanelsEAP AuthenticationEAP (Extensible Authentication Protocol) is an Enterpr

Appendix B: Wireless Technology161MVP-5100/5150 Modero Viewpoint Touch PanelsEAP communication overviewEAP Authentication goes a step beyond just enc

Accessories9MVP-5100/5150 Modero Viewpoint Touch PanelsWall Charging StationThe optional MVP-WCS-52 Wall Charging Station (FG5966-1X) offers the same

Appendix B: Wireless Technology162MVP-5100/5150 Modero Viewpoint Touch PanelsAMX Certificate Upload UtilityThe Certificate Upload utility gives you t

Appendix B: Wireless Technology163MVP-5100/5150 Modero Viewpoint Touch Panels6. Select the IP Address that corresponds to the virtual IP Address assi

Appendix C: Troubleshooting164MVP-5100/5150 Modero Viewpoint Touch PanelsAppendix C: TroubleshootingThis section describes the solutions to possible

Appendix C: Troubleshooting165MVP-5100/5150 Modero Viewpoint Touch PanelsDevice Isn’t Appearing In The Online Tree Tab1.Verify that the System number

Appendix C: Troubleshooting166MVP-5100/5150 Modero Viewpoint Touch PanelsOnly One Modero Panel In My System Shows UpSymptom: I have more than one Mod

Appendix167MVP-5100/5150 Modero Viewpoint Touch Panels

12/08 ©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without n

Accessories10MVP-5100/5150 Modero Viewpoint Touch PanelsThe touch panel remains locked in the MVP-WCS-52 until unlocked by the user. This may be done

Accessories11MVP-5100/5150 Modero Viewpoint Touch PanelsRechargingTo recharge the touch panel:1. Slide the device into the Wall Charging Station crad

AMX Limited Warranty and DisclaimerAll products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from

Accessories12MVP-5100/5150 Modero Viewpoint Touch PanelsInstalling the MVP-WCS-52Since the Wall Charging Station is intended to be affixed to a wall

Accessories13MVP-5100/5150 Modero Viewpoint Touch Panels3. Run the power cable through the knockout into the box. Pull out about six inches (15.25cm)

Accessories14MVP-5100/5150 Modero Viewpoint Touch Panels Strip 0.25 inch (6.35 mm) of wire insulation off all wires. Insert each wire into the appr

Accessories15MVP-5100/5150 Modero Viewpoint Touch Panels11. After fully seating the screws, wipe down the area around the screw holes with the alcoho

Accessories16MVP-5100/5150 Modero Viewpoint Touch PanelsInstalling the Optional Metal Rough-In BoxThe optional Metal Rough-In Box (FG037-11) is 10 in

Accessories17MVP-5100/5150 Modero Viewpoint Touch PanelsOther MVP-WCS-52 installationsThe Wall-Mounted Charging Station is designed to be installed i

Accessories18MVP-5100/5150 Modero Viewpoint Touch Panels

Configuring Communication19MVP-5100/5150 Modero Viewpoint Touch PanelsConfiguring CommunicationAll control for a MVP-5150 touch panel is established

Configuring Communication20MVP-5100/5150 Modero Viewpoint Touch PanelsIR CommunicationBoth the MVP-5100 and MVP-5150 may be used as infrared remote d

Configuring Communication21MVP-5100/5150 Modero Viewpoint Touch PanelsModero Setup and System SettingsAll AMX Modero panels, including the MVP-5100 a

FCC InformationThis device complies with Part 15 of the FCC Rules and Industry Canada RSS 210, subject to the following two conditions: (1) this devi

Configuring Communication22MVP-5100/5150 Modero Viewpoint Touch PanelsFor more information on the Setup and Protected Setup pages, refer to the Setup

Configuring Communication23MVP-5100/5150 Modero Viewpoint Touch PanelsWireless Settings - Wireless Access Overview (MVP-5150 Only)DHCPWhen choosing D

Configuring Communication24MVP-5100/5150 Modero Viewpoint Touch PanelsWireless communication using a DHCP AddressIn the Protected Setup page:1. Selec

Configuring Communication25MVP-5100/5150 Modero Viewpoint Touch PanelsWireless communication using a Static IP Address1.From the Protected Setup page

Configuring Communication26MVP-5100/5150 Modero Viewpoint Touch PanelsUsing the Site Survey toolThis tool allows a user to "sniff out" all

Configuring Communication27MVP-5100/5150 Modero Viewpoint Touch Panels4. Select a desired Access Point by touching the corresponding row. The up arro

Configuring Communication28MVP-5100/5150 Modero Viewpoint Touch Panels5. In this keyboard, enter the SSID name used on the target Wireless Access Poi

Configuring Communication29MVP-5100/5150 Modero Viewpoint Touch Panels6. Click Done when complete.7. From the Open (Clear Text) Settings page (FIG. 1

Configuring Communication30MVP-5100/5150 Modero Viewpoint Touch Panels2. Locate the Wireless Security menu (FIG. 21). 3. Press the Static WEP button

Configuring Communication31MVP-5100/5150 Modero Viewpoint Touch Panels6. Toggle the Default Key field to choose a WEP Key value (from 1- 4) that matc

Software License and Warranty Agreement• LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described

Configuring Communication32MVP-5100/5150 Modero Viewpoint Touch Panels12. Verify that the fields within the IP Settings section have been properly co

Configuring Communication33MVP-5100/5150 Modero Viewpoint Touch PanelsStep 3: Choose a Master Connection ModeSince the MVP-5150 may connect with a Ma

Configuring Communication34MVP-5100/5150 Modero Viewpoint Touch PanelsPanel downloads and firmware updatesThe MVP-5100 and MVP-5150 devices support a

Configuring Communication35MVP-5100/5150 Modero Viewpoint Touch Panels6. In the new window: - Select Use the following IP Address. Under IP address

Configuring Communication36MVP-5100/5150 Modero Viewpoint Touch Panels9. The Windows XP machine now searches for the suitable driver (FIG. 29).10. On

Configuring Communication37MVP-5100/5150 Modero Viewpoint Touch Panels3. Right click on the selected device and select Properties to open the Local A

Configuring Communication38MVP-5100/5150 Modero Viewpoint Touch PanelsSystems Settings page of the Protected Settings menu, as shown in FIG. 33. (For

Configuring Communication39MVP-5100/5150 Modero Viewpoint Touch Panels2. In NetLinx Studio, select Settings > Master Communication Settings from t

Configuring Communication40MVP-5100/5150 Modero Viewpoint Touch Panels6. Click the Edit Settings button to open the Virtual NetLinx Master Settings d

Configuring Communication41MVP-5100/5150 Modero Viewpoint Touch Panels3. Set the Master Port and select Done.4. If you enabled password security on y

Table of ContentsiMVP-5100/5150 Modero Viewpoint Touch PanelsTable of ContentsIntroduction ...

Configuring Communication42MVP-5100/5150 Modero Viewpoint Touch Panels8. Click OK to close the open dialogs, save the settings, and return to the mai

Configuring Communication43MVP-5100/5150 Modero Viewpoint Touch Panels18. Press the on-screen Reboot button to save any changes and restart the panel

Configuring Communication44MVP-5100/5150 Modero Viewpoint Touch Panels

Setup Pages45MVP-5100/5150 Modero Viewpoint Touch PanelsSetup PagesBoth the MVP-5100 and MVP-5150 feature on-board Setup pages. Use the options in th

Setup Pages46MVP-5100/5150 Modero Viewpoint Touch PanelsSetup Page (Cont.)Connection Status: Displays whether the panel has external communication, a

Setup Pages47MVP-5100/5150 Modero Viewpoint Touch PanelsNavigation ButtonsThe following Navigation buttons (FIG. 42) appear on the left side of the S

Setup Pages48MVP-5100/5150 Modero Viewpoint Touch PanelsInformation ButtonThe Information button allows access of both the Project Information page,

Setup Pages49MVP-5100/5150 Modero Viewpoint Touch PanelsProject Information Page (Cont.)Sales Order: Displays the sales order information.Purchase Or

Setup Pages50MVP-5100/5150 Modero Viewpoint Touch PanelsPanel Information PageThe Panel Information page provides detailed panel information (FIG. 44

Setup Pages51MVP-5100/5150 Modero Viewpoint Touch PanelsTime & Date Settings PageThe options on the Time & Date Settings page (FIG. 45) allow

iiMVP-5100/5150 Modero Viewpoint Touch PanelsTable of ContentsAutomatically setting SSID ...

Setup Pages52MVP-5100/5150 Modero Viewpoint Touch PanelsAudio Settings PageThe Audio Settings page allows adjustment of volume levels and panel sound

Setup Pages53MVP-5100/5150 Modero Viewpoint Touch PanelsBattery Settings PageThe options on the Battery Settings page allow setting of power warning

Setup Pages54MVP-5100/5150 Modero Viewpoint Touch Panels

Protected Setup Pages55MVP-5100/5150 Modero Viewpoint Touch PanelsProtected Setup PagesThe Protected Setup page (FIG. 48) provides secured access to

Protected Setup Pages56MVP-5100/5150 Modero Viewpoint Touch PanelsProtected Setup Page (Cont.)System Recovery: • Reset System Settings - Deletes all

Protected Setup Pages57MVP-5100/5150 Modero Viewpoint Touch PanelsThe Protected Setup page for the MVP-5100 is slightly different, as some of the fun

Protected Setup Pages58MVP-5100/5150 Modero Viewpoint Touch PanelsProtected Setup Navigation ButtonsThe Protected Setup Navigation Buttons (FIG. 51)

Protected Setup Pages59MVP-5100/5150 Modero Viewpoint Touch PanelsSystem Settings PageThe System Settings page (FIG. 53) displays sets the NetLinx Ma

Protected Setup Pages60MVP-5100/5150 Modero Viewpoint Touch PanelsRefer to the Step 3: Choose a Master Connection Mode section on page 33 for more de

Protected Setup Pages61MVP-5100/5150 Modero Viewpoint Touch PanelsWireless Settings Page (MVP-5150 Only)Use the options on the Wireless Settings page

Table of ContentsiiiMVP-5100/5150 Modero Viewpoint Touch PanelsUpgrading Firmware ...

Protected Setup Pages62MVP-5100/5150 Modero Viewpoint Touch PanelsWireless Settings Page (Cont.)IP Settings (Cont.)Secondary DNS Enter the secondary

Protected Setup Pages63MVP-5100/5150 Modero Viewpoint Touch PanelsWireless Settings Page (Cont.)Wireless Security (Cont.):EAP-TTLS This button opens

Protected Setup Pages64MVP-5100/5150 Modero Viewpoint Touch PanelsWireless Security The options on the Wireless Security section (FIG. 55) include th

Protected Setup Pages65MVP-5100/5150 Modero Viewpoint Touch PanelsOpen (Clear Text) SettingsPress the Open (Clear Text) button to open the Open (Clea

Protected Setup Pages66MVP-5100/5150 Modero Viewpoint Touch PanelsStatic WEP SettingsPress the Static WEP button to open the Static WEP Settings page

Protected Setup Pages67MVP-5100/5150 Modero Viewpoint Touch PanelsRefer to the Configuring Wireless Network Access (MVP-5150 Only) section on page 23

Protected Setup Pages68MVP-5100/5150 Modero Viewpoint Touch Panels Enter a pass phrase with a minimum of 8 characters and a maximum of 63. The exac

Protected Setup Pages69MVP-5100/5150 Modero Viewpoint Touch PanelsAll three of these certificate-using security methods are documented in the followi

Protected Setup Pages70MVP-5100/5150 Modero Viewpoint Touch PanelsEAP-LEAP SettingsPress the EAP-LEAP button to open the EAP-LEAP Settings page (FIG.

Protected Setup Pages71MVP-5100/5150 Modero Viewpoint Touch Panels Refer to the EAP Authentication section on page 160 for further details on these

ivMVP-5100/5150 Modero Viewpoint Touch PanelsTable of ContentsInput mask output examples ...

Protected Setup Pages72MVP-5100/5150 Modero Viewpoint Touch PanelsEAP-FAST SettingsPress the EAP-FAST button to open the EAP-FAST Settings dialog (FI

Protected Setup Pages73MVP-5100/5150 Modero Viewpoint Touch PanelsRefer to the EAP Authentication section on page 160 and the Using the Site Survey t

Protected Setup Pages74MVP-5100/5150 Modero Viewpoint Touch PanelsEAP-PEAP SettingsPress the EAP-PEAP button to open the EAP-PEAP Settings page (FIG.

Protected Setup Pages75MVP-5100/5150 Modero Viewpoint Touch PanelsEAP-PEAP security is designed for wireless environments where it is necessary to tr

Protected Setup Pages76MVP-5100/5150 Modero Viewpoint Touch PanelsEAP-TTLS SettingsPress the EAP-TTLS button to open the EAP-TTLS Settings page (FIG.

Protected Setup Pages77MVP-5100/5150 Modero Viewpoint Touch PanelsRefer to the EAP Authentication section on page 160 and the Using the Site Survey t

Protected Setup Pages78MVP-5100/5150 Modero Viewpoint Touch PanelsEAP-TLS SettingsPress the EAP-TLS button to open the EAP-TLS Settings page (FIG. 65

Protected Setup Pages79MVP-5100/5150 Modero Viewpoint Touch Panels Refer to the EAP Authentication section on page 160 for further details on these

Protected Setup Pages80MVP-5100/5150 Modero Viewpoint Touch PanelsClient certificate configurationA client certificate can be configured by an IT dep

Protected Setup Pages81MVP-5100/5150 Modero Viewpoint Touch PanelsCalibration PageThe Calibration page (FIG. 66) allows you to calibrate the touch pa

Introduction1MVP-5100/5150 Modero Viewpoint Touch PanelsIntroductionThe MVP-5100 Modero® Viewpoint® IR Touch Panel (FG5966-08) and the MVP-5150 Moder

Protected Setup Pages82MVP-5100/5150 Modero Viewpoint Touch PanelsOther SettingsPress the Other Settings button to display the two settings options f

Protected Setup Pages83MVP-5100/5150 Modero Viewpoint Touch PanelsPassword Settings PageThe options on the Password Settings page (FIG. 68) allow ass

Protected Setup Pages84MVP-5100/5150 Modero Viewpoint Touch PanelsThe User Access section allows the Administrator to control access of all individua

Upgrading Firmware85MVP-5100/5150 Modero Viewpoint Touch PanelsUpgrading FirmwareThe MVP-5100 and MVP-5150 come already loaded with on-board firmware

Upgrading Firmware86MVP-5100/5150 Modero Viewpoint Touch Panels6. Press the Reboot button both to save any changes and to restart the panel. Remember

Upgrading Firmware87MVP-5100/5150 Modero Viewpoint Touch Panels10. Click the Communications Settings... button to open the Communications Settings di

Upgrading Firmware88MVP-5100/5150 Modero Viewpoint Touch Panels21. The OnLine Tree should now display the connection to the device. The Connection St

Upgrading Firmware89MVP-5100/5150 Modero Viewpoint Touch Panels7. Select Tools > Firmware Transfers > Send to NetLinx Device from the main menu

Upgrading Firmware90MVP-5100/5150 Modero Viewpoint Touch PanelsA Special Note for Network Interface ConnectionsDue to any USB connection to your PC b

Upgrading Firmware91MVP-5100/5150 Modero Viewpoint Touch Panels3. From the Advanced menu, select Advanced Settings... to open the Advanced Settings w